Search...
EN
EnglishEnglish FrenchFrench SpanishSpanish GermanGerman VietnameseVietnamese

Home / Products / Drilling and Tapping Center

Drilling and Tapping Center

Vertical Machining Center

5 axis cnc machine

Drilling and Tapping Center

Horizontal Machining Center

Gantry Machining Center

Horizontal CNC Lathe
  • TC540-345 axis high-precision and high-efficiency CNC drilling and tapping center

    TC540-345 axis high-precision and high-efficiency CNC drilling and tapping center

    Drilling and Tapping Center

    X/Y/Z Travel: 500/400/300mm

    Worktable Size: 650*400mm

    Max.loading Capacity: 300kg

    View More Inquiry

    TC540-345 axis high-precision and high-efficiency CNC drilling and tapping center

    Item/ContentParameter
    Triaxial travel500/400/300 (mm)
    Distance from spindle end face to center of table150-450 (mm)
    Table area650*400 (mm)
    Maximum bearing capacity300 (kg)
    T-slot (slot number * slot width * spacing)3*14*121 (mm)
    Maximum spindle speed20000 (rpm)
    Spindle diameter/inner taper⌀100/BBT30
    Spindle motor power3.7/5.5(kW)
    Three axis fast moving speed48/48/48 (m/min)
    Triaxial feed speed (X/Y/Z)10/10/10 (m/min)
    Tool storage capacity21
    Maximum tool diameter/length/weight⌀60mm/200mm/3kg
    Maximum tool diameter (full tool/adjacent empty tool)60/80 (mm)
    Tool exchange time1.3 (s)
    Positioning accuracy (X/Y/Z)0.008 (mm)
    Repeated positioning accuracy (X/Y/Z)0.005 (mm)
    Air source/pressure280L/min  6-8bar
    Linear rolling guide Specifications (X/Y/Z)Ball 30/30/35 (mm)
    Ball screw Specifications (X/Y/Z)32/32/32 (mm)
    Servo motor specification9/9/22.5 (Nm)
    Total electrical capacity15 (KVA)
    Machine profile dimensions1900*2420*2700 (mm)
    Machine weight3050 (kg)
    Main configuration of machine tool
    1.FANUC 0i MF（5 pack）CNC 1
    2.Hand held operation unit 1
    3.Clamp-arm tool magazine 21T
    4.Automatic lubrication system 1
    5.Three-color light 1
    6.Air curtain protection 1
    7.Spindle air blowing device 1
    8.Working light 1
    9.Relevant accessories 1
    10.Set of standard technical documents 1
    Random attachment1.Airgun (including tubes and connectors) H-606-1(including pipe 8*5-4m, connector) 1 set
    2.CF card(2G)，CF card cover， card reader  General 1 set
    3.toolbox  Bomei 1 pcs
    4.Phillips screwdriver 6*150 1 pcs
    5.Slotted screwdriver 6*150 1 pcs
    6.Allen wrench 1.5-10MM 1 set
    7.Hanging rings M24 4 pcs
    8.Plug M24 2 Pcs
    9.External power cable RVV4*6mm²*5000 1 Pcs
    Machine tool main parts brand1.CNC System FANUC   JAPAN
    2.Tool Magazine  POJU  TAIWAN
    3.Spindle HAOZHI/AIBIG/DEJO  China
    4.Ball Screw / HIWIN/PMI TAIWAN/TAIWAN
    5.Linear Guide / HIWIN/PMI TAIWAN/TAIWAN
    6.Screw Bearing NSK/NACHI JAPAN/GERMANY
    7.Lubricating oil pump  BAOTN  CHINA
    8.Main pneumatic components SMC/ SMC/AIRTAC JAPAN/TAIWAN
    9.Main electrical components schneider/omron FRANCE/JAPAN
    Equipment customer security adjustment preparation table1.Foundation confirmation 3T，The machine tool weighs about 3T, see the foundation diagram：Recommended quick-drying cement for secondary pouring of anchor bolts: high strength non-shrinkage grouting material
    2.Preparing the incoming power cable Cable YJV 4*10mm²
    3.Preparing for compressed air access  100μm  10mm Air source filtration precision 100μm Air tube outer diameter 10mm
    4.Equipment oil  See Recommended Oils and Grease Table for details.
    5.Transportation status confirmation
    01.Confirm the transportation method according to the factory and surrounding road conditions
    02.Meet the net transportation size of the largest component of the machine tool
    03.Confirm the lifting method according to the actual height of the factory building
    6. Preparation for installing spreader ， 4.5T  Steel wire rope, safe load-bearing of more than 4.5T
    Keep under warrantyThe warranty period of the machine tool is 12 months from the date of shipment of the equipment.
    During the warranty period, if machine tool failure occurs due to product quality problems, we will be responsible for free remote technical maintenance support.
    The following cases are within the warranty period, but are not applicable and the user must pay all repair costs:
    When the machine tool is damaged due to earthquake, typhoon, flood or other disasters beyond human control.
    When the product is faulty, rusty or damaged due to improper operation and maintenance by the buyer.
    After the warranty period, the seller is responsible for ensuring the paid supply of accessories and providing maintenance technical consultation and paid maintenance. The seller charges the cost of replacing faulty parts at a preferential price and provides spare parts for the parts.
    Working conditions of CNC machine toolsEquipment use environment requirements
    Maintaining a constant level of ambient temperature is an essential factor for precision machining.
    1. The available ambient temperature requires 10℃～40℃. When the ambient temperature is 20℃, the humidity should be 40～75%. In order to keep the static accuracy of the machine tool within the specified range, the optimal ambient temperature requires 15℃～25℃, and the temperature difference shall not exceed ±2℃/24h.
    2. Power supply voltage: 3-phase, 380V, voltage fluctuation within ±10%, power supply frequency: 50HZ.
    3. If the voltage in the use area is unstable, the machine tool should be equipped with a stabilized power supply to ensure the normal operation of the machine tool.
    4. The machine tool should have reliable grounding: the grounding wire is a copper wire, the wire diameter should not be less than 10mm², and the grounding resistance is less than 4 ohms.
    5. In order to ensure the normal working performance of the equipment, if the compressed air of the air source does not meet the air source requirements, a set of air source purification device (dehumidification, degreasing, filtration) should be added before the machine tool intake.
    6. Keep the equipment away from direct sunlight, vibration sources, heat sources, high-frequency generators, electric welders, etc. to avoid machine production failures or loss of machine accuracy.


  • TC1670-3/4/5 axis high rigidity spindle high speed high efficiency CNC drilling and tapping center

    TC1670-3/4/5 axis high rigidity spindle high speed high efficiency CNC drilling and tapping center

    Drilling and Tapping Center

    X/Y/Z Travel: 1600/700/400mm

    Worktable Size: 1700*650mm

    Max.loading Capacity: 500kg

    View More Inquiry

    TC1670-3/4/5 axis high rigidity spindle high speed high efficiency CNC drilling and tapping center

    Item/ContentParameter
    Triaxial travel1600/700/400 (mm)
    Distance from spindle end face to center of table150-550 (mm)
    Table area1700*650 (mm)
    Maximum bearing capacity500 (kg)
    T-slot (slot number * slot width * spacing)5*14*130 (mm)
    Maximum spindle speed20000 (rpm)
    Spindle diameter/inner taper⌀100/BBT30
    Spindle motor power3.7/5.5(kW)
    Three axis fast moving speed30/36/48 (m/min)
    Triaxial feed speed (X/Y/Z)10/10/10 (m/min)
    Tool storage capacity21
    Maximum tool diameter/length/weight⌀60mm/200mm/3kg
    Maximum tool diameter (full tool/adjacent empty tool)60/80 (mm)
    Tool exchange time1.3 (s)
    Positioning accuracy (X/Y/Z)0.012 (mm)
    Repeated positioning accuracy (X/Y/Z)0.008 (mm)
    Air source/pressure280L/min  6-8bar
    Linear rolling guide Specifications (X/Y/Z)Ball 35/35/45 (mm)
    Ball screw Specifications (X/Y/Z)40/32/36 (mm)
    Servo motor specification13.7/13.7/22.5 (Nm)
    Total electrical capacity15 (KVA)
    Machine profile dimensions4000*3400*3100 (mm)
    Machine weight6200 (kg)
    Main configuration of machine tool1.FANUC 0i MF（5 pack） CNC 1
    2.Hand held operation unit 1
    3.Clamp-arm tool magazine 1 21T
    4.Automatic lubrication system 1
    5.Three-color light 1
    6.Air curtain protection 1
    7.Spindle air blowing device 1
    8.Working light 1
    9.Relevant accessories 1
    10.Set of standard technical documents 1 
    Random attachment1.Airgun (including tubes and connectors) H-606-1(including pipe 8*5-4m, connector) 1 set
    2.CF card(2G)，CF card cover， card reader  General 1 set
    3.toolbox  Bomei 1 pcs
    4.Phillips screwdriver 6*150 1 pcs
    5.Slotted screwdriver 6*150 1 pcs
    6.Allen wrench 1.5-10MM 1 set
    7.Hanging rings M24 4 pcs
    8.Plug M24 2 Pcs
    9.External power cable RVV4*6mm²*5000 1 Pcs
    Machine tool main parts brand1.CNC System FANUC   JAPAN
    2.Tool Magazine  POJU  TAIWAN
    3.Spindle HAOZHI/AIBIG/DEJO  China
    4.Ball Screw HIWIN/PMI TAIWAN/TAIWAN
    5.Linear Guide HIWIN/PMI TAIWAN/TAIWAN
    6.Screw Bearing NSK/NACHI JAPAN/GERMANY
    7.Lubricating oil pump  BAOTN  CHINA
    8.Main pneumatic components SMC/AIRTAC JAPAN/TAIWAN
    9.Main electrical components schneider/omron FRANCE/JAPAN
    Equipment customer security adjustment preparation table1.Foundation confirmation 6.2T，The machine tool weighs about 3T, see the foundation diagram：Recommended quick-drying cement for secondary pouring of anchor bolts: high strength non-shrinkage grouting material
    2.Preparing the incoming power cable Cable YJV 4*10mm²
    3.Preparing for compressed air access  100μm  10mm Air source filtration precision 100μm Air tube outer diameter 10mm
    4.Equipment oil  See Recommended Oils and Grease Table for details.
    5.Transportation status confirmation
    01.Confirm the transportation method according to the factory and surrounding road conditions
    02.Meet the net transportation size of the largest component of the machine tool
    03.Confirm the lifting method according to the actual height of the factory building
    6. Preparation for installing spreader ， 4.5T  Steel wire rope, safe load-bearing of more than 8T
    Keep under warrantyThe warranty period of the machine tool is 12 months from the date of shipment of the equipment.
    During the warranty period, if machine tool failure occurs due to product quality problems, we will be responsible for free remote technical maintenance support.
    The following cases are within the warranty period, but are not applicable and the user must pay all repair costs:
    When the machine tool is damaged due to earthquake, typhoon, flood or other disasters beyond human control.
    When the product is faulty, rusty or damaged due to improper operation and maintenance by the buyer.
    After the warranty period, the seller is responsible for ensuring the paid supply of accessories and providing maintenance technical consultation and paid maintenance. The seller charges the cost of replacing faulty parts at a preferential price and provides spare parts for the parts.
    Working conditions of CNC machine toolsEquipment use environment requirements
    Maintaining a constant level of ambient temperature is an essential factor for precision machining.
    1. The available ambient temperature requires 10℃～40℃. When the ambient temperature is 20℃, the humidity should be 40～75%. In order to keep the static accuracy of the machine tool within the specified range, the optimal ambient temperature requires 15℃～25℃, and the temperature difference shall not exceed ±2℃/24h.
    2. Power supply voltage: 3-phase, 380V, voltage fluctuation within ±10%, power supply frequency: 50HZ.
    3. If the voltage in the use area is unstable, the machine tool should be equipped with a stabilized power supply to ensure the normal operation of the machine tool.
    4. The machine tool should have reliable grounding: the grounding wire is a copper wire, the wire diameter should not be less than 10mm², and the grounding resistance is less than 4 ohms.
    5. In order to ensure the normal working performance of the equipment, if the compressed air of the air source does not meet the air source requirements, a set of air source purification device (dehumidification, degreasing, filtration) should be added before the machine tool intake.
    6. Keep the equipment away from direct sunlight, vibration sources, heat sources, high-frequency generators, electric welders, etc. to avoid machine production failures or loss of machine accuracy.


  • TC840-345-axis metal parts machining CNC drilling and tapping center

    TC840-345-axis metal parts machining CNC drilling and tapping center

    Drilling and Tapping Center

    X/Y/Z Travel: 800/400/300mm

    Worktable Size: 900*400mm

    Max.loading Capacity: 300kg

    View More Inquiry

    TC840-345-axis metal parts machining CNC drilling and tapping center

    Item/Content Parameter
    Triaxial travel800/400/300 (mm)
    Distance from spindle end face to center of table150-450 (mm)
    Table area900*400 (mm)
    Maximum bearing capacity300 (kg)
    T-slot (slot number * slot width * spacing)3*14*120 (mm)
    Maximum spindle speed20000 (rpm)
    Spindle diameter/inner taper⌀100/BBT30
    Spindle motor power3.7/5.5(kW)
    Three axis fast moving speed48/48/48 (m/min)
    Triaxial feed speed (X/Y/Z)10/10/10 (m/min)
    Tool storage capacity21
    Maximum tool diameter/length/weight⌀60mm/200mm/3kg
    Maximum tool diameter (full tool/adjacent empty tool)60/80 (mm)
    Tool exchange time1.3 (s)
    Positioning accuracy (X/Y/Z)0.008 (mm)
    Repeated positioning accuracy (X/Y/Z)0.005 (mm)
    Air source/pressure280L/min  6-8bar
    Linear rolling guide Specifications (X/Y/Z)Ball 30/30/35 (mm)
    Ball screw Specifications (X/Y/Z)32/32/32 (mm)
    Servo motor specification9/9/22.5 (Nm)
    Total electrical capacity15 (KVA)
    Machine profile dimensions2200*2600*2700 (mm)
    Machine weight3300 (kg)
    Main configuration of machine tool1.FANUC 0i MF（5 pack） CNC 1
    2.Hand held operation unit 1
    3.Clamp-arm tool magazine 1 21T
    4.Automatic lubrication system 1
    5.Three-color light 1
    6.Air curtain protection 1
    7.Spindle air blowing device 1
    8.Working light 1
    9.Relevant accessories 1
    10.Set of standard technical documents 1 
    Random attachment1.Airgun (including tubes and connectors) H-606-1(including pipe 8*5-4m, connector) 1 set
    2.CF card(2G)，CF card cover， card reader  General 1 set
    3.toolbox  Bomei 1 pcs
    4.Phillips screwdriver 6*150 1 pcs
    5.Slotted screwdriver 6*150 1 pcs
    6.Allen wrench 1.5-10MM 1 set
    7.Hanging rings M24 4 pcs
    8.Plug M24 2 Pcs
    9.External power cable RVV4*6mm²*5000 1 Pcs
    Machine tool main parts brand1.CNC System FANUC   JAPAN
    2.Tool Magazine  POJU  TAIWAN
    3.Spindle HAOZHI/AIBIG/DEJO  China
    4.Ball Screw HIWIN/PMI TAIWAN/TAIWAN
    5.Linear Guide HIWIN/PMI TAIWAN/TAIWAN
    6.Screw Bearing NSK/NACHI JAPAN/GERMANY
    7.Lubricating oil pump  BAOTN  CHINA
    8.Main pneumatic components SMC/AIRTAC JAPAN/TAIWAN
    9.Main electrical components schneider/omron FRANCE/JAPAN
    Equipment customer security adjustment preparation table1.Foundation confirmation 3.3T，The machine tool weighs about 3T, see the foundation diagram：Recommended quick-drying cement for secondary pouring of anchor bolts: high strength non-shrinkage grouting material
    2.Preparing the incoming power cable Cable YJV 4*10mm²
    3.Preparing for compressed air access  100μm  10mm Air source filtration precision 100μm Air tube outer diameter 10mm
    4.Equipment oil  See Recommended Oils and Grease Table for details.
    5.Transportation status confirmation
    01.Confirm the transportation method according to the factory and surrounding road conditions
    02.Meet the net transportation size of the largest component of the machine tool
    03.Confirm the lifting method according to the actual height of the factory building
    6. Preparation for installing spreader ， 4.5T  Steel wire rope, safe load-bearing of more than 4.5T
    Keep under warrantyThe warranty period of the machine tool is 12 months from the date of shipment of the equipment.
    During the warranty period, if machine tool failure occurs due to product quality problems, we will be responsible for free remote technical maintenance support.
    The following cases are within the warranty period, but are not applicable and the user must pay all repair costs:
    When the machine tool is damaged due to earthquake, typhoon, flood or other disasters beyond human control.
    When the product is faulty, rusty or damaged due to improper operation and maintenance by the buyer.
    After the warranty period, the seller is responsible for ensuring the paid supply of accessories and providing maintenance technical consultation and paid maintenance. The seller charges the cost of replacing faulty parts at a preferential price and provides spare parts for the parts.
    Working conditions of CNC machine toolsEquipment use environment requirements
    Maintaining a constant level of ambient temperature is an essential factor for precision machining.
    1. The available ambient temperature requires 10℃～40℃. When the ambient temperature is 20℃, the humidity should be 40～75%. In order to keep the static accuracy of the machine tool within the specified range, the optimal ambient temperature requires 15℃～25℃, and the temperature difference shall not exceed ±2℃/24h.
    2. Power supply voltage: 3-phase, 380V, voltage fluctuation within ±10%, power supply frequency: 50HZ.
    3. If the voltage in the use area is unstable, the machine tool should be equipped with a stabilized power supply to ensure the normal operation of the machine tool.
    4. The machine tool should have reliable grounding: the grounding wire is a copper wire, the wire diameter should not be less than 10mm², and the grounding resistance is less than 4 ohms.
    5. In order to ensure the normal working performance of the equipment, if the compressed air of the air source does not meet the air source requirements, a set of air source purification device (dehumidification, degreasing, filtration) should be added before the machine tool intake.
    6. Keep the equipment away from direct sunlight, vibration sources, heat sources, high-frequency generators, electric welders, etc. to avoid machine production failures or loss of machine accuracy.


  • TC1065-345-axis CNC drilling and tapping center for metal processing is affordable and high-precision

    TC1065-345-axis CNC drilling and tapping center for metal processing is affordable and high-precision

    Drilling and Tapping Center

    X/Y/Z Travel: 1000/650/300mm

    Worktable Size: 1100*650mm

    Max.loading Capacity: 450kg

    View More Inquiry

    TC1065-345-axis CNC drilling and tapping center for metal processing is affordable and high-precision

    Item/ContentParameter
    Triaxial travel1000/650/300 (mm)
    Distance from spindle end face to center of table150-450 (mm)
    Table area1100*650 (mm)
    Maximum bearing capacity450 (kg)
    T-slot (slot number * slot width * spacing)3*14*120 (mm)
    Maximum spindle speed20000 (rpm)
    Spindle diameter/inner taper⌀100/BBT30
    Spindle motor power3.7/5.5(kW)
    Three axis fast moving speed48/48/48 (m/min)
    Triaxial feed speed (X/Y/Z)10/10/10 (m/min)
    Tool storage capacity21
    Maximum tool diameter/length/weight⌀60mm/200mm/3kg
    Maximum tool diameter (full tool/adjacent empty tool)60/80 (mm)
    Tool exchange time1.3 (s)
    Positioning accuracy (X/Y/Z)0.010 (mm)
    Repeated positioning accuracy (X/Y/Z)0.006 (mm)
    Air source/pressure280L/min  6-8bar
    Linear rolling guide Specifications (X/Y/Z)Ball 30/35/35 (mm)
    Ball screw Specifications (X/Y/Z)40/32/32 (mm)
    Servo motor specification9/13.7/22.5 (Nm)
    Total electrical capacity15 (KVA)
    Machine profile dimensions2700*3220*2900 (mm)
    Machine weight4200 (kg)
    Main configuration of machine tool1.FANUC 0i MF（5 pack） CNC 1
    2.Hand held operation unit 1
    3.Clamp-arm tool magazine 1 21T
    4.Automatic lubrication system 1
    5.Three-color light 1
    6.Air curtain protection 1
    7.Spindle air blowing device 1
    8.Working light 1
    9.Relevant accessories 1
    10.Set of standard technical documents 1 
    Random attachment1.Airgun (including tubes and connectors) H-606-1(including pipe 8*5-4m, connector) 1 set
    2.CF card(2G)，CF card cover， card reader  General 1 set
    3.toolbox  Bomei 1 pcs
    4.Phillips screwdriver 6*150 1 pcs
    5.Slotted screwdriver 6*150 1 pcs
    6.Allen wrench 1.5-10MM 1 set
    7.Hanging rings M24 4 pcs
    8.Plug M24 2 Pcs
    9.External power cable RVV4*6mm²*5000 1 Pcs
    Machine tool main parts brand1.CNC System FANUC   JAPAN
    2.Tool Magazine  POJU  TAIWAN
    3.Spindle HAOZHI/AIBIG/DEJO  China
    4.Ball Screw HIWIN/PMI TAIWAN/TAIWAN
    5.Linear Guide HIWIN/PMI TAIWAN/TAIWAN
    6.Screw Bearing NSK/NACHI JAPAN/GERMANY
    7.Lubricating oil pump  BAOTN  CHINA
    8.Main pneumatic components SMC/AIRTAC JAPAN/TAIWAN
    9.Main electrical components schneider/omron FRANCE/JAPAN
    Equipment customer security adjustment preparation table1.Foundation confirmation 3.3T，The machine tool weighs about 3T, see the foundation diagram：Recommended quick-drying cement for secondary pouring of anchor bolts: high strength non-shrinkage grouting material
    2.Preparing the incoming power cable Cable YJV 4*10mm²
    3.Preparing for compressed air access  100μm  10mm Air source filtration precision 100μm Air tube outer diameter 10mm
    4.Equipment oil  See Recommended Oils and Grease Table for details.
    5.Transportation status confirmation
    01.Confirm the transportation method according to the factory and surrounding road conditions
    02.Meet the net transportation size of the largest component of the machine tool
    03.Confirm the lifting method according to the actual height of the factory building
    6. Preparation for installing spreader ， 4.5T  Steel wire rope, safe load-bearing of more than 4.5T
    Keep under warrantyThe warranty period of the machine tool is 12 months from the date of shipment of the equipment.
    During the warranty period, if machine tool failure occurs due to product quality problems, we will be responsible for free remote technical maintenance support.
    The following cases are within the warranty period, but are not applicable and the user must pay all repair costs:
    When the machine tool is damaged due to earthquake, typhoon, flood or other disasters beyond human control.
    When the product is faulty, rusty or damaged due to improper operation and maintenance by the buyer.
    After the warranty period, the seller is responsible for ensuring the paid supply of accessories and providing maintenance technical consultation and paid maintenance. The seller charges the cost of replacing faulty parts at a preferential price and provides spare parts for the parts.
    Working conditions of CNC machine toolsEquipment use environment requirements
    Maintaining a constant level of ambient temperature is an essential factor for precision machining.
    1. The available ambient temperature requires 10℃～40℃. When the ambient temperature is 20℃, the humidity should be 40～75%. In order to keep the static accuracy of the machine tool within the specified range, the optimal ambient temperature requires 15℃～25℃, and the temperature difference shall not exceed ±2℃/24h.
    2. Power supply voltage: 3-phase, 380V, voltage fluctuation within ±10%, power supply frequency: 50HZ.
    3. If the voltage in the use area is unstable, the machine tool should be equipped with a stabilized power supply to ensure the normal operation of the machine tool.
    4. The machine tool should have reliable grounding: the grounding wire is a copper wire, the wire diameter should not be less than 10mm², and the grounding resistance is less than 4 ohms.
    5. In order to ensure the normal working performance of the equipment, if the compressed air of the air source does not meet the air source requirements, a set of air source purification device (dehumidification, degreasing, filtration) should be added before the machine tool intake.
    6. Keep the equipment away from direct sunlight, vibration sources, heat sources, high-frequency generators, electric welders, etc. to avoid machine production failures or loss of machine accuracy.


  • TC1365-Easy-to-use and inexpensive CNC drilling and tapping machines use all branded accessories with reliable quality

    TC1365-Easy-to-use and inexpensive CNC drilling and tapping machines use all branded accessories with reliable quality

    Drilling and Tapping Center

    X/Y/Z Travel: 1300/650/300mm

    Worktable Size: 1400*650mm

    Max.loading Capacity: 450kg

    View More Inquiry

    TC1365-Easy-to-use and inexpensive CNC drilling and tapping machines use all branded accessories with reliable quality

    Item/Content Parameter
    Triaxial travel1300/650/300 (mm)
    Distance from spindle end face to center of table150-450 (mm)
    Table area1400*650 (mm)
    Maximum bearing capacity450 (kg)
    T-slot (slot number * slot width * spacing)5*14*120 (mm)
    Maximum spindle speed20000 (rpm)
    Spindle diameter/inner taper⌀100/BBT30
    Spindle motor power3.7/5.5(kW)
    Three axis fast moving speed30/48/48 (m/min)
    Triaxial feed speed (X/Y/Z)10/10/10 (m/min)
    Tool storage capacity21
    Maximum tool diameter/length/weight⌀60mm/200mm/3kg
    Maximum tool diameter (full tool/adjacent empty tool)60/80 (mm)
    Tool exchange time1.3 (s)
    Positioning accuracy (X/Y/Z)0.010 (mm)
    Repeated positioning accuracy (X/Y/Z)0.006 (mm)
    Air source/pressure280L/min  6-8bar
    Linear rolling guide Specifications (X/Y/Z)Ball 30/35/35 (mm)
    Ball screw Specifications (X/Y/Z)40/32/32 (mm)
    Servo motor specification9/13.7/22.5 (Nm)
    Total electrical capacity15 (KVA)
    Machine profile dimensions3300*3220*2900 (mm)
    Machine weight4400 (kg)
    Main configuration of machine tool1.FANUC 0i MF（5 pack） CNC 1
    2.Hand held operation unit 1
    3.Clamp-arm tool magazine 1 21T
    4.Automatic lubrication system 1
    5.Three-color light 1
    6.Air curtain protection 1
    7.Spindle air blowing device 1
    8.Working light 1
    9.Relevant accessories 1
    10.Set of standard technical documents 1 
    Random attachment1.Airgun (including tubes and connectors) H-606-1(including pipe 8*5-4m, connector) 1 set
    2.CF card(2G)，CF card cover， card reader  General 1 set
    3.toolbox  Bomei 1 pcs
    4.Phillips screwdriver 6*150 1 pcs
    5.Slotted screwdriver 6*150 1 pcs
    6.Allen wrench 1.5-10MM 1 set
    7.Hanging rings M24 4 pcs
    8.Plug M24 2 Pcs
    9.External power cable RVV4*6mm²*5000 1 Pcs
    Machine tool main parts brand1.CNC System FANUC   JAPAN
    2.Tool Magazine  POJU  TAIWAN
    3.Spindle HAOZHI/AIBIG/DEJO  China
    4.Ball Screw HIWIN/PMI TAIWAN/TAIWAN
    5.Linear Guide HIWIN/PMI TAIWAN/TAIWAN
    6.Screw Bearing NSK/NACHI JAPAN/GERMANY
    7.Lubricating oil pump  BAOTN  CHINA
    8.Main pneumatic components SMC/AIRTAC JAPAN/TAIWAN
    9.Main electrical components schneider/omron FRANCE/JAPAN
    Equipment customer security adjustment preparation table1.Foundation confirmation 4.4T，The machine tool weighs about 3T, see the foundation diagram：Recommended quick-drying cement for secondary pouring of anchor bolts: high strength non-shrinkage grouting material
    2.Preparing the incoming power cable Cable YJV 4*10mm²
    3.Preparing for compressed air access  100μm  10mm Air source filtration precision 100μm Air tube outer diameter 10mm
    4.Equipment oil  See Recommended Oils and Grease Table for details.
    5.Transportation status confirmation
    01.Confirm the transportation method according to the factory and surrounding road conditions
    02.Meet the net transportation size of the largest component of the machine tool
    03.Confirm the lifting method according to the actual height of the factory building
    6. Preparation for installing spreader ， 4.5T  Steel wire rope, safe load-bearing of more than 6T
    Keep under warrantyThe warranty period of the machine tool is 12 months from the date of shipment of the equipment.
    During the warranty period, if machine tool failure occurs due to product quality problems, we will be responsible for free remote technical maintenance support.
    The following cases are within the warranty period, but are not applicable and the user must pay all repair costs:
    When the machine tool is damaged due to earthquake, typhoon, flood or other disasters beyond human control.
    When the product is faulty, rusty or damaged due to improper operation and maintenance by the buyer.
    After the warranty period, the seller is responsible for ensuring the paid supply of accessories and providing maintenance technical consultation and paid maintenance. The seller charges the cost of replacing faulty parts at a preferential price and provides spare parts for the parts.
    Working conditions of CNC machine toolsEquipment use environment requirements
    Maintaining a constant level of ambient temperature is an essential factor for precision machining.
    1. The available ambient temperature requires 10℃～40℃. When the ambient temperature is 20℃, the humidity should be 40～75%. In order to keep the static accuracy of the machine tool within the specified range, the optimal ambient temperature requires 15℃～25℃, and the temperature difference shall not exceed ±2℃/24h.
    2. Power supply voltage: 3-phase, 380V, voltage fluctuation within ±10%, power supply frequency: 50HZ.
    3. If the voltage in the use area is unstable, the machine tool should be equipped with a stabilized power supply to ensure the normal operation of the machine tool.
    4. The machine tool should have reliable grounding: the grounding wire is a copper wire, the wire diameter should not be less than 10mm², and the grounding resistance is less than 4 ohms.
    5. In order to ensure the normal working performance of the equipment, if the compressed air of the air source does not meet the air source requirements, a set of air source purification device (dehumidification, degreasing, filtration) should be added before the machine tool intake.
    6. Keep the equipment away from direct sunlight, vibration sources, heat sources, high-frequency generators, electric welders, etc. to avoid machine production failures or loss of machine accuracy.


  • TC640-High rigidity and high efficiency CNC drilling and tapping machine center price

    TC640-High rigidity and high efficiency CNC drilling and tapping machine center price

    Drilling and Tapping Center

    X/Y/Z Travel: 600/400/300mm

    Worktable Size: 700*400mm

    Max.loading Capacity: 300kg

    View More Inquiry

    TC640-High rigidity and high efficiency CNC drilling and tapping machine center price

    Item/ContentParameter
    Triaxial travel600/400/300 (mm)
    Distance from spindle end face to center of table150-450 (mm)
    Table area700*400 (mm)
    Maximum bearing capacity300 (kg)
    T-slot (slot number * slot width * spacing)3*14*120 (mm)
    Maximum spindle speed20000 (rpm)
    Spindle diameter/inner taper⌀100/BBT30
    Spindle motor power3.7/5.5(kW)
    Three axis fast moving speed48/48/48 (m/min)
    Triaxial feed speed (X/Y/Z)10/10/10 (m/min)
    Tool storage capacity21
    Maximum tool diameter/length/weight⌀60mm/200mm/3kg
    Maximum tool diameter (full tool/adjacent empty tool)60/80 (mm)
    Tool exchange time1.3 (s)
    Positioning accuracy (X/Y/Z)0.008 (mm)
    Repeated positioning accuracy (X/Y/Z)0.005 (mm)
    Air source/pressure280L/min  6-8bar
    Linear rolling guide Specifications (X/Y/Z)Ball 30/30/35 (mm)
    Ball screw Specifications (X/Y/Z)32/32/32 (mm)
    Servo motor specification9/9/22.5 (Nm)
    Total electrical capacity15 (KVA)
    Machine profile dimensions1880*2600*2700 (mm)
    Machine weight3100 (kg)
    Main configuration of machine tool1.FANUC 0i MF（5 pack） CNC 1
    2.Hand held operation unit 1
    3.Clamp-arm tool magazine 1 21T
    4.Automatic lubrication system 1
    5.Three-color light 1
    6.Air curtain protection 1
    7.Spindle air blowing device 1
    8.Working light 1
    9.Relevant accessories 1
    10.Set of standard technical documents 1 
    Random attachment1.Airgun (including tubes and connectors) H-606-1(including pipe 8*5-4m, connector) 1 set
    2.CF card(2G)，CF card cover， card reader  General 1 set
    3.toolbox  Bomei 1 pcs
    4.Phillips screwdriver 6*150 1 pcs
    5.Slotted screwdriver 6*150 1 pcs
    6.Allen wrench 1.5-10MM 1 set
    7.Hanging rings M24 4 pcs
    8.Plug M24 2 Pcs
    9.External power cable RVV4*6mm²*5000 1 Pcs
    Machine tool main parts brand1.CNC System FANUC   JAPAN
    2.Tool Magazine  POJU  TAIWAN
    3.Spindle HAOZHI/AIBIG/DEJO  China
    4.Ball Screw HIWIN/PMI TAIWAN/TAIWAN
    5.Linear Guide HIWIN/PMI TAIWAN/TAIWAN
    6.Screw Bearing NSK/NACHI JAPAN/GERMANY
    7.Lubricating oil pump  BAOTN  CHINA
    8.Main pneumatic components SMC/AIRTAC JAPAN/TAIWAN
    9.Main electrical components schneider/omron FRANCE/JAPAN
    Equipment customer security adjustment preparation table1.Foundation confirmation 3.1T，The machine tool weighs about 3T, see the foundation diagram：Recommended quick-drying cement for secondary pouring of anchor bolts: high strength non-shrinkage grouting material
    2.Preparing the incoming power cable Cable YJV 4*10mm²
    3.Preparing for compressed air access  100μm  10mm Air source filtration precision 100μm Air tube outer diameter 10mm
    4.Equipment oil  See Recommended Oils and Grease Table for details.
    5.Transportation status confirmation
    01.Confirm the transportation method according to the factory and surrounding road conditions
    02.Meet the net transportation size of the largest component of the machine tool
    03.Confirm the lifting method according to the actual height of the factory building
    6. Preparation for installing spreader ,4.5T  Steel wire rope, safe load-bearing of more than 4.5T
    Keep under warrantyThe warranty period of the machine tool is 12 months from the date of shipment of the equipment.
    During the warranty period, if machine tool failure occurs due to product quality problems, we will be responsible for free remote technical maintenance support.
    The following cases are within the warranty period, but are not applicable and the user must pay all repair costs:
    When the machine tool is damaged due to earthquake, typhoon, flood or other disasters beyond human control.
    When the product is faulty, rusty or damaged due to improper operation and maintenance by the buyer.
    After the warranty period, the seller is responsible for ensuring the paid supply of accessories and providing maintenance technical consultation and paid maintenance. The seller charges the cost of replacing faulty parts at a preferential price and provides spare parts for the parts.
    Working conditions of CNC machine toolsEquipment use environment requirements
    Maintaining a constant level of ambient temperature is an essential factor for precision machining.
    1. The available ambient temperature requires 10℃～40℃. When the ambient temperature is 20℃, the humidity should be 40～75%. In order to keep the static accuracy of the machine tool within the specified range, the optimal ambient temperature requires 15℃～25℃, and the temperature difference shall not exceed ±2℃/24h.
    2. Power supply voltage: 3-phase, 380V, voltage fluctuation within ±10%, power supply frequency: 50HZ.
    3. If the voltage in the use area is unstable, the machine tool should be equipped with a stabilized power supply to ensure the normal operation of the machine tool.
    4. The machine tool should have reliable grounding: the grounding wire is a copper wire, the wire diameter should not be less than 10mm², and the grounding resistance is less than 4 ohms.
    5. In order to ensure the normal working performance of the equipment, if the compressed air of the air source does not meet the air source requirements, a set of air source purification device (dehumidification, degreasing, filtration) should be added before the machine tool intake.
    6. Keep the equipment away from direct sunlight, vibration sources, heat sources, high-frequency generators, electric welders, etc. to avoid machine production failures or loss of machine accuracy.


  • TC650-tegrated high-speed drilling & tapping for consistent precision machining

    TC650-tegrated high-speed drilling & tapping for consistent precision machining

    Drilling and Tapping Center

    X/Y/Z Travel: 600/500/400mm

    Worktable Size: 700×500mm

    Max.loading Capacity: 250KG

    View More Inquiry

    TC650-tegrated high-speed drilling & tapping for consistent precision machining

    NameUnitParameter
    Working Range
    X/Y/Z Travelmm600/500/400
    Spindle Nose to Worktable Distancemm150～550
    Spindle Center to Column Guidewaymm554
    Worktable
    Worktable Size (L×W)mm700×500
    Max. Loading Capacitykg250
    T-slot (Qty×Width×Pitch)—3×14×160
    Spindle
    Spindle Dia. / TapermmØ100 / BBT30
    Spindle Speedrpm20000 (M) / 20000 (F)
    Spindle Motor PowerkW3.7/5.5 (M) / 3.7/5.5 (F)
    Spindle TorqueN·m14.1/21 (M) / 11.8/28.7 (F)
    3-Axis Motor
    X/Y/Z Motor PowerkW1.5/1.5/2.2 (M) / 2.5/2.5/2.7 (F)
    X/Y/Z TorqueN·m9/9/12 (M) / 8/8/12 (F)
    Feed Speed
    Rapid Traverse (X/Y/Z)m/min48/48/48
    Cutting Feedratem/min10/10/10
    Tool Magazine
    Tool CapacityPcs21
    Max. Tool Dia. / Length / Weight—Ø60mm / 200mm / 3kg
    Max. Tool Dia. (Full / Adjacent Empty)mm60 / 80
    Tool to Tool Change Times1.4
    Machine Accuracy
    Positioning Accuracy (X/Y/Z)mm0.008
    Repeat Positioning Accuracy (X/Y/Z)mm0.005
    Ball Screw
    Ball Screw Spec. (X/Y/Z)mm28-12 / 28-12 / 32-12
    Guideway
    Linear Guideway Spec. (X/Y/Z)mm30 / 30 / 35
    Others
    Air Consumption / Air Pressure—280L/min, 6～8 bar
    Total Power CapacitykVA15
    Overall Dimension (X×Y×Z)mm1850×2630×2700
    Machine Weight (Approx.)kg3600


  • Tc1600-High-rigidity drill-tap center, high-speed cutting with stable and lasting precision.

    Tc1600-High-rigidity drill-tap center, high-speed cutting with stable and lasting precision.

    Drilling and Tapping Center

    X/Y/Z Travel: 1600/500/300

    Worktable Size: 1700×400mm

    Max.loading Capacity: 450KG

    View More Inquiry

    Tc1600-High-rigidity drill-tap center, high-speed cutting with stable and lasting precision.

    ItemUnitParameterRemarks
    Working Range


    X/Y/Z Axis Travelmm1600/500/300
    Distance from Spindle Nose to Worktable Surfacemm150～450
    Distance from Spindle Center to Column Guidewaymm516
    Worktable


    Table Size (L × W)mm1700×400
    Max. Table Loadkg450
    T-slots (Qty × Width × Pitch)-3×14×121
    Spindle


    Spindle Dia. / TapermmØ100 / BBT30
    Spindle Speedrpm20000 (M) / 20000 (F)
    Spindle Motor PowerkW3.7/5.5 (M) / 3.7/5.5 (F)Rated / Max
    Spindle Motor TorqueN·m14.1/21 (M) / 11.8/28.7 (F)Rated / Max
    3-Axis Motor


    Motor Power X/Y/ZkW1.5/2/3 (M) / 1.8/1.8/3.0 (F)
    Motor Torque X/Y/ZN·m9/13.7/22.5 (M) / 11/11/20 (F)
    Feed Speed


    Rapid Traverse X/Y/Zm/min30/48/48
    Cutting Feedratem/min10/10/10
    Tool Magazine


    Tool Capacitypcs21
    Max. Tool Dia. / Length / Weight-Ø60mm / 200mm / 3kg
    Max. Tool Dia. (Full Magazine / With Adjacent Empty Pocket)mm60 / 80
    Tool Change Time (Tool to Tool)s1.4
    Accuracy


    Positioning Accuracy (X/Y/Z)mm0.012
    Repeat Positioning Accuracy (X/Y/Z)mm0.008
    Ball Screw


    Ball Screw Spec. (X/Y/Z)mm40-20 / 32-16 / 32-16
    Linear Guideway


    Linear Rolling Guide Spec. (X/Y/Z)mm30 / 30 / 35
    Others


    Air Flow / Air Pressure-280L/min , 6～8 bar
    Total Electrical CapacitykVA15
    Machine Overall Dimension (L×W×H)mm3850×2670×2700
    Machine Weight (Approx.)kg4500


  • TC840-345axis High-rigidity drill-tap center, consistent long-term precision in high-speed cutting.

    TC840-345axis High-rigidity drill-tap center, consistent long-term precision in high-speed cutting.

    Drilling and Tapping Center

    X/Y/Z Travel: 800/400/300

    Worktable Size: 900×400mm

    Max.loading Capacity: 300KG

    View More Inquiry

    TC840-345axis High-rigidity drill-tap center, consistent long-term precision in high-speed cutting.

    Name

    Unit

    Parameter

    Note

    Travel

    Three axis travel

    mm

    800/400/300

    Distance from spindle end face to worktable

    center

    mm

    150~450


    Worktable

    Worktable   Size(L*W)

    mm

    900×400

    Maximum load-bearing capacity of work

    surface

    kg

    300


    T-shaped slot (quantity × width× spacing)

    mm

    3×14×120


    Spindle

     

    Spindle diameter Spindle bore taper


    Ø100/ BT30

    Max spindle speed

    rpm

    20000


    Motor power

    kW

    3.7/5.5


    Feed

     

    Three axis fast moving speed

    （X/Y/Z）

    m/min

    48/48/48

    (X/Y/Z）

    Three axis feed speed

    m/min

    10/10/10


    Magazine capacity


    21


    Max tool diameter/length/weight


    Æ60mm/200mm/3kg


    Maximum   tool diameter (full tool/adjacent empty tool)

    mm

    60/80


    Tool exchange time (T-T)

    s

    1.3


    Accuracy

    (X/Y/Z) Positioning accuracy

    mm

    0.008

    (X/Y/Z) repositioning accuracy

    mm

    0.005


    Others

     

    Air source/pressure


    280L/min  6~8bar

    Total electrical capacity

    KVA

    15


    Machine   size (X×Y×Z)

    mm

    2200×2600×2700


    estimated weight

    kg

    3300



  • TC850345axis High-rigidity drill-tap center, consistent long-term precision in high-speed cutting.

    TC850345axis High-rigidity drill-tap center, consistent long-term precision in high-speed cutting.

    Drilling and Tapping Center

    X/Y/Z Travel: 800/500/400

    Worktable Size: 900×500mm

    Max.loading Capacity: 250KG

    View More Inquiry

    TC850345axis High-rigidity drill-tap center, consistent long-term precision in high-speed cutting.

    Name

    Unit

    Parameter

    Note

    Travel

    Three axis travel

    mm

    800/500/400

    Distance from spindle end face to worktable

    center

    mm

    135~535


    Worktable

    Worktable   Size(L*W)

    mm

    900×500

    Maximum load-bearing capacity of work

    surface

    kg

    250


    T-shaped slot (quantity × width× spacing)

    mm

    3×14×160


    Spindle

     

    Spindle diameter Spindle bore taper


    Ø100/BBT30

     Max spindle speed

    rpm

    20000


     Motor power

    kW

    3.7/5.5


    Feed

     

     Three axis fast moving speed

    （X/Y/Z）

    m/min

    48/48/48

    X/Y/Z）

    Three axis feed speed

    m/min

    10/10/10


     Magazine capacity


    21


    Max tool diameter/length/weight


    Æ60mm/200mm/3kg


    Maximum   tool diameter (full tool/adjacent empty tool)

    mm

    60/80


    Tool exchange time (T-T)

    s

    1.3


    Accuracy

    (X/Y/Z) Positioning accuracy

    mm

    0.008

    (X/Y/Z) repositioning accuracy

    mm

    0.005


    Others

     

     Air source/pressure


    280L/min  6~8bar

    otal electrical capacity

    KVA

    15


    Machine   size (X×Y×Z)

    mm

    2150×2700×2600


     estimated weight

    kg

    3700



Hi! Welcome back.
How are you doing?

High-end intelligent equipment overall solution provider

Home

Products

Solutions

Contact Us

News & Events

About Us

E-mail lee@gugaocnc.com
Tel

+86 138-0962-2930

Add

No. 772, Meijing West Road, Dalang Town, Dongguan, China

Copyright © 2025 Gugao Intelligent Equipment Co.,Ltd            Powered by Bontop