VFC480 5-axis Vertical Machining Center 5 axis cnc machine parameter list

Equipment Introduction:

1.Bed and 5-axis Slider

1.1Major components such as the machine tool bed and 5-axis slider are cast from high-quality HT300 cast iron with resin sand molding, endowing the machine tool with high rigidity and long-term precision stability. They have undergone full secondary aging treatment (tempering and vibratory stress relief), which guarantees the stability of the machine tool's performance during long-term use.

1.2The movement of the 5-axis slider realizes the X and Y axes of the machine tool. The X and Y axes adopt Taiwan heavy-duty linear guide rails with high rigidity and excellent dynamic performance.

1.3Taiwan ball screws are directly connected to motors for drive. The ball screws are installed with pre-tensioning, which improves transmission rigidity and positioning accuracy, featuring a compact structure, stable movement and high precision.

2、 Column

2.1The column adopts a herringbone design, which is stable and solid.

2.2The vertical movement of the spindle box on the column forms the Z axis. The Z axis adopts Taiwan heavy-duty linear guide rails, and imported ball screws are directly connected to motors for drive. The ball screws are installed with pre-tensioning, featuring a compact structure, stable movement and high precision.

3、Spindle System

The spindle is a BT40 spindle with high precision and high rigidity. P4 grade special spindle bearings are adopted. The entire spindle assembly is completed under constant temperature conditions and all undergo dynamic balance correction and running-in tests, which improve the service life and reliability of the entire spindle system. The spindle is directly connected to the spindle motor, featuring high rotational speed and low noise, and can realize spindle orientation and rigid tapping functions.

 4、 5-axis Components

The 5-axis system adopts a cradle-type turret with DD direct-drive A and C axes, ensuring high positioning accuracy and repeat positioning accuracy. The A and C axes have high rotational speeds, with the maximum speed of the C axis reaching 250r/min and that of the A axis reaching 200r/min.

5、Detection System

The machine tool is standard equipped with a contact tool setter and a probe system.

6、 Circulating Cooling System and Spindle Cooling Device

The spindle is cooled by an oil cooler to prevent thermal deformation and improve machining accuracy. The tool is cooled by water with a spindle annular spray device.

7、Pneumatic System

7.1All functions of the pneumatic system are realized by solenoid valves controlled by PLC programs, including air cooling and other functions.

7.2The pneumatic circuit system mainly includes a pneumatic triple unit and solenoid valve components. Impurities and moisture are filtered out from the gas through an oil-water separator to prevent damage and corrosion to the machine tool caused by impure gas.

8、 Automatic Tool Changer System

The machine tool is equipped with a fully enclosed 32-station disc-type tool magazine with good sealing performance, high precision and fast tool changing speed.

9、 Protection System

All guide rails of the machine tool are equipped with enclosed protective covers to prevent iron chips and coolant from entering the machine tool interior, avoiding corrosion of the guide rails and ball screws, and extending the service life and precision retention of the machine tool.

10、Lubrication System

10.1The guide rails and ball screws adopt a centralized automatic timing and quantitative grease lubrication system, which periodically supplies oil to all lubrication points, ensuring flexible and reliable operation of moving parts, and being economical and environmentally friendly.

10.2Imported high-speed and low-temperature grease is used for spindle bearings and ball screw bearings, enabling long-term lubrication and reliable movement.

11、Automatic Chip Removal System

The machine tool can be optionally equipped with a chain plate type chip remover.

12、 Control System and Motors

12.1The electrical cabinet of the machine tool adopts Taiwan components and professional wiring technology with reliable performance. The electrical cabinet is reliably sealed and equipped with an industrial air conditioner for dust and moisture removal, ensuring the safe and stable operation of the machine tool.

12.2The CNC system adopts the Syntec system driven by AC servo motors, with high precision and advanced performance. Other imported or domestic systems can be selected according to customer requirements.